Home Assetto Corsa Tutorials AC FFB LUT settings G27/29 and DFGT

AC FFB LUT settings G27/29 and DFGT

2622
0
Force Feedback
Sending
User Rating 5 (5 votes)

To be able to drift proper u need to set up your force feedback right. The following tutorial will explain how to do so, this is specifficly for G27/29 and DFGT steering wheels. This was originally posted by RasmusP on Racedepartment i did make slight adjustments to make it a little better for drifting. Below this post is a link to the various LUT files, there are tree different since we all have our own preferences so just test them out wich you like best personally i like the one with GAMMA. For DFGT users theres only one LUT file.

Important: the first two values are the most important ones to get rid of the deadzone. If your wheel is shaking when standing still or vibrating too much: Lower the first value (0|0.120) to maybe 0|0.100. This first value is NOT influenced by the overall ffb from the game! The game ffb starts at the second value.

01. Adjust InGame-settings and Profiler:

AC_InGame_Settings_degrees2

AC_InGame_Settings

Lochitech Profiler

02. Open the controls.ini:
You can find it in: “C:\Users\%username%\Documents\Assetto Corsa\cfg\controls.ini

set “MIN_FF=0.00“, “CENTER_BOOST_GAIN=0.0“, “CENTER_BOOST_RANGE=0.1” (range doesn’t matter if “GAIN=0.0”)

controls.ini

03. open the assetto_corsa.ini:
You can find it in: “C:\Program Files (x86)\Steam\SteamLibrary\steamapps\common\assettocorsa\system\cfg\assetto_corsa.ini

set ENABLE_GYRO=0, DAMPER_MIN_LEVEL=0.0, DAMPER_GAIN=0.0

Assetto Corsa ini

04. open the ff_post_process.ini
You can find it in:”C:\Users\%username%\Documents\Assetto Corsa\cfg\ff_post_process.ini

set VERSION=1, TYPE=LUT, ENABLED=1, VALUE=1.0, Curve=%nameOfYourLutFile%

This enables the LUT. If the Value is NOT 1.0 the LUT won’t work as it should!

Post Processs

05. Put the LUT into the same folder as the ff_post_process.ini!
[“C:\Users\%username%\Documents\Assetto Corsa\cfg\”

5. HAPPY DRIFTING 🙂

6. additional:
Logitech Profiler:
– overall: 100
– spring: 0
– damper: 0
untick center spring, NO combined pedals, 900° rotation, TICK “allow game to adjust settings”

AC InGame:
– Gain: 100% (75-125% In the CAR)
– Filter: 0
– Min Force: 0%
– kerb: 12%
– road: 10% (10% is enough to give you some subtle vibrations on surface changes)
– slip: 5% (important to feel spinning or locking wheels!)
– understeer: untick (unrealistic, only good for learning)
– Steering Settings: gamma 1, filter 0, sensivity 0!!

[Assetto_corsa.ini:]
DAMPER_MIN_LEVEL=0.0: This means, that the InGame dampening (a few versions ago there was a slider?!) is OFF, when the Engine says the damper to be zero. If you increase this settings, your dampening will ALWAYS BE ON, even if the engine does NOT give the input for it.

DAMPER_GAIN=0.0: I don’t like it! The G27 delivers already very few details so you don’t want anything to be dampened!

DOWNLOAD

1 COMMENT

  1. Holy shit i could not hold a drift proper untill i used these settings, it gives much better feel of the car and control

LEAVE A REPLY

Please enter your comment!
Please enter your name here